Micrel, Inc.
KSZ8851-16MLLJ
March 2010
56
M9999-030210-1.0
Transmit Status Register (0x72 – 0x73): TXSR
This register keeps the status of the last transmitted frame.
Bit
Default Value
R/W
Description
15-14
0x0
RO
Reserved.
13
0x0
RO
TXLC Transmit Late Collision
This bit is set when a transmit Late Collision occurs.
12
0x0
RO
TXMC Transmit Maximum Collision
This bit is set when a transmit Maximum Collision is reached.
11-6
-
RO
Reserved.
5-0
-
RO
TXFID Transmit Frame ID
This field identifies the transmitted frame. All of the transmit status information in this
register belongs to the frame with this ID.
Receive Control Register 1 (0x74 – 0x75): RXCR1
This register holds control information programmed by the CPU to control the receive function.
Bit
Default Value
R/W
Description
15
0x0
RW
FRXQ Flush Receive Queue
When this bit is set, The receive queue memory is cleared and RX frame pointer is reset.
Note: Disable the RXE receive enable bit[0] first before set this bit, then clear this bit to
normal operation.
14
0x0
RW
RXUDPFCC Receive UDP Frame Checksum Check Enable
When this bit is set, the KSZ8851 will check for correct UDP checksum for incoming UDP
frames. Any received UDP frames with incorrect checksum will be discarded.
13
0x0
RW
RXTCPFCC Receive TCP Frame Checksum Check Enable
When this bit is set, the KSZ8851 will check for correct TCP checksum for incoming TCP
frames. Any received TCP frames with incorrect checksum will be discarded.
12
0x0
RW
RXIPFCC Receive IP Frame Checksum Check Enable
When this bit is set, the KSZ8851 will check for correct IP header checksum for incoming
IP frames. Any received IP frames with incorrect checksum will be discarded.
11
0x1
RW
RXPAFMA Receive Physical Address Filtering with MAC Address Enable
When this bit is set, this bit enables the RX function to receive physical address that pass
the MAC address filtering mechanism (see Address Filtering Scheme in Table 3 for
detail).
10
0x0
RW
RXFCE Receive Flow Control Enable
When this bit is set and the KSZ8851-16MLLJ is in full-duplex mode, flow control is
enabled, and the KSZ8851-16MLLJ will acknowledge a PAUSE frame from the receive
interface; i.e., the outgoing packets are pending in the transmit buffer until the PAUSE
frame control timer expires. This field has no meaning in half-duplex mode and should be
programmed to 0.
When this bit is cleared, flow control is not enabled.
9
0x0
RW
RXEFE Receive Error Frame Enable
When this bit is set, CRC error frames are allowed to be received into the RX queue.
When this bit is cleared, all CRC error frames are discarded.
8
0x0
RW
RXMAFMA Receive Multicast Address Filtering with MAC Address Enable
When this bit is set, this bit enables the RX function to receive multicast address that pass
the MAC address filtering mechanism (see Address Filtering Scheme in Table 3 for
detail).
相关PDF资料
PIC18F24K20-I/SS IC PIC MCU FLASH 8KX16 28SSOP
PIC16F77-E/ML IC MCU FLASH 8KX14 A/D 44QFN
PIC16LF74T-I/ML IC MCU FLASH 4KX14 A/D 44QFN
PIC16F723-I/MV IC MCU 8BIT 7KB FLASH 28UQFN
PIC18F442T-I/ML IC MCU FLASH 8KX16 EE A/D 44QFN
PIC18LF2439-I/SP IC MCU FLASH 6KX16 EE A/D 28DIP
PIC16F687-I/ML IC PIC MCU FLASH 2KX14 20QFN
PIC18LF2439-I/SO IC MCU FLASH 6KX16 EE A/D 28SOIC
相关代理商/技术参数
PIC16F77T-I/PT 功能描述:8位微控制器 -MCU 14KB 368 RAM 33 I/O RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
PIC16F77T-I/PTG 功能描述:8位微控制器 -MCU 14KB 368 RAM 33 I/O RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
PIC16F77TIPT 制造商:MICROCHIP 功能描述:New
PIC16F785-E/ML 功能描述:8位微控制器 -MCU 3.5 KB 128 RAM 18I/O RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
PIC16F785-E/P 功能描述:8位微控制器 -MCU 14KB 368 RAM 33 I/O RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
PIC16F785-E/SO 功能描述:8位微控制器 -MCU 3.5KB FL 128R 18 I/O RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
PIC16F785-E/SS 功能描述:8位微控制器 -MCU 3.5KB FL 128R 18 I/O RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
PIC16F785-I/ML 功能描述:8位微控制器 -MCU 3.5 KB 128 RAM 18I/O RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT